User's Manual

Specifying an IP Address

If no DHCP server is available, assign an IP address to each MT800 through the following:

1. Tap Start → Settings →

Network and Dial-up Connections.

NOTE: Tap Start → Settings

→ Control Panel → double tap

Network and Dial-up Connections.

2. Double-tap SMSC95001.

3. Tap the radio button next to

Specify an IP address. Input the

proper IP address, Subnet Mask

and Default Gateway.

4. In the Name Servers tab, input

the proper Primary DNS:,

Secondary DNS:, Primary WINS:

and Secondary WINS:. Tap OK.

NOTE: To avoid conflict with the Local Area Network environment, consult an MIS department

for the correct Transmission Control Protocol / Internet Protocol setting.