User Manual

Table Of Contents

Specifying an IP Address

If no DHCP server is available, assign an IP address to each MT680-AMWTAG through the following:

1. Tap Start → Settings → Network and

Dial-up Connections.

NOTE: Tap Start → Settings → Con-

trol Panel → double-tap Net-

work and Dial-up Connections.

2. Double-tap DM9ISA1.

3. Tap the radio button next to Specify an IP

address. Input the proper IP address,

Subnet Mask and Default Gateway.

4. In the Name Servers tab, input the proper

Primary DNS:, Secondary DNS:, Pri-

mary WINS: and Secondary WINS:. Tap

OK.

NOTE: To avoid conflict with the Local

Area Network environment, con-

sult an MIS department for the

correct Transmission Control Pro-

tocol / Internet Protocol setting.