User Manual

Chapter 3 Data Communication
19
Set Up an IP Address
The MT680-AMWTAG automatically detects WLAN module(FCC ID: TWG-SDCCF10G) during the first installation.
Set the IP address through one of the following methods:
• Obtaining an IP Address via Dynamic Host Configuration Protocol (DHCP) Server.
• Specifying an IP Address.
Obtaining an IP Address via DHCP Server
Make sure a DHCP server is available in the LAN environment before trying to obtain the IP address
through a DHCP server.
1. Tap Start → Settings → Network and
Dial-up Connections.
NOTE: Tap Start → Settings → Con-
trol Panel → double-tap Network
and Dial-up Connections.
2. Double-tap DM9ISA1.
3. Tap the radio button next to Obtain an IP
address via DHCP and then tap OK.