User Manual

Table Of Contents

Setting up the MT680-AMWTAG

Connect Power

Connect power to the MT680-AMWTAG through the following:

NOTE: A UPS battery is used for normal operation when there is no external power source.

The battery also functions as a data backup battery. Therefore, data entered may not

be properly stored until the built-in backup battery has been adequately charged.

1. Plug the Power Adapter Cable into the

MT680-AMWTAG’s DC input jack, then connect the other end of

the Power Adapter into an electrical outlet.

2. Locate the Backup Battery Switch on the MT680’s back panel, and move it to the right to the

“On” position.

Charging the Battery

The MT680 must be charged for at least 12 hours before initial use. The battery begins charging as

soon as the Power Adapter Cable plugs into an external power source.

Using the Touch-screen

1. Lightly tap the screen to choose a menu option.

2. Double-tap to open programs.

3. Use the Windows CE Keyboard to type letters or numbers into a data field or a form.

4. Press down and hold on an item to access additional options.

DC Input

Jack

Off

Backup Battery

Switch