User's Manual

28
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Performing a Hardware Reset
Perform a reset if MT380 freezes (i.e., device no longer responds to the buttons on the screen).
Performing a Warm Start
A Warm Start is used to reset or reboot the device without losing data stored in RAM. Perform a Warm
Start in any of the following situations:
• MT380 fails to respond.
• After installing software applications.
• After making changes to certain system settings (i.e. SD card).
CAUTION! A Warm Start will cause unsaved data to be lost.
Method 1: From Windows CE
1. Tap o Programs o Utilities o Boot-
Mode.
2. Tap Warm Boot.
Method 2: From Hardware
1. Locate the function keys on MT380.
2. Press F2 and F4 simultaneously.
F2 F4