User's Manual
42
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
24. Under the Permit Setting tab, check Anti-back. Click Apply oSend to immediately send this
command to the controller. A window appears with the message Setting Successfully.
25. Under the Entrance guard weekly plan tab, select a desired weekday from the drop down
menu.
26. Inside the PeriodID field, double-click +. The Selected periods window appears.
27. Click a desired time period (for example, PeriodID 127) to set for 24 hours of access in this
weekday, and click OK.