User's Manual

Chapter 4 Advanced Setting
41
18. Input the card number in the Card No. field. Click Apply o OK to return to the User setting
window.
NOTE: See General Settings on page 12 to acquire the card number.
19. Click OK to return to the JanitorLite - [Users Management] window.
20. Click Permit(P
) o Permit Management.
21. Select the desired user group (Demo), and click Setting on the toolbar. The Selected Control-
lers window appears.
22. Select the desired controllers (MT180 and Demo), and click OK to return to the JanitorLite -
[Permit Management] window.
23. Double-click the desired user group (Demo). The UserGroup Setting window appears.