User's Manual

Chapter 2 Using the Hardware

Using DECT Phone (Optional)

MT180 has an optional DECT module that can make intercom calls. The procedures for registering

MT180 to DECT base stations may vary between phone service providers. MT180 can register up to

four base stations.

NOTE: Before registration, make sure the voice module is properly installed while MT180 pow-

ers on through the running module checking process.

1. Press and hold on the back panel of the base station for 15 - 20 seconds. The LED indica-

tor on the front panel flashes.

2. Press F1 to enter the terminal menu.

3. Press F3 to select the Advanced option.

4. Press F5 to enter the Advanced option.

5. Enter the system login password (12345678, by default) and press F5 to confirm.

6. Enter the Voice Park option. The screen displays Voice Module Parking OK when registration

is completed.

Make an intercom call by using an AWTEK DECT phone through the following:

1. Press Talk/Doorbell. MT180 connects to the

DECT phone while the screen displays Con-

nect... Please wait!.

The LED indicator on the DECT phone

flashes and the phone rings with the

MT180’s HS number (HS1, by default)

shown onscreen.

2. Press answer to receive the call. MT180

beeps while the screen displays Calling...,

the duration of this call is shown on the

DECT phone screen.

3. Press À on the DECT phone, to trigger the

door open.

NOTE: Ensure the relay wiring is ready.

Cancel registration by using a registered handset.

Cancel MT180’s registration on an AWTEK DECT phone handset through the following:

1. Press to enter the main menu.

2. Press or to select the BS setting option. Press to confirm. The screen displays

Waiting....

3. Follow the onscreen prompt to input the base station’s Master PIN (0000, by default) and press

to confirm. A confirmation sound beeps, and the sub menu opens.

4. Press or to select the Remove HS option. Press to confirm. The screen displays

Remove HS1/2/3/4/5?.

5. Follow the onscreen prompt to input MT180’s HS number (1/2/3/4/5, by default) or press to

cancel.

1. Press to confirm. A confirmation sound beeps, and the screen displays Not sub when this

setting is done.

Press the button