User's Manual
Chapter 2 Using the Hardware
9
5. To enroll the first fingerprint for this card, input 0000 in the Index field and click Enroll Finger
(1). Input 000000000000 in the Fingerprint Index field and click Add a Card No (2).
Utilize JanitorLite to collect fingerprints through the following:
1. Connect MT180 to a computer network. See Establishing Terminal-PC Connection on page 3.
2. Enable Unitech MT Service in the Control Panel.
3. On the computer screen, click start
oAll Programs oJanitorLite oJanitorLite.
4. Click System
oSysParams Setting. The SetParams window appears.
Specify the IP address and port number of the fingerprint reader. Click OK.
1
2