User's Manual

51
- Codes are not concatenated by default (default transmission
setting is "single codes only").
- You must select one of the "concatenated codes" transmission
options to send concatenated codes (see "transmit" section).
Code 128 / GS1-128 - ISBT 128 - Disable (*)
<SW>434100
Code 128 / GS1-128 - ISBT 128 - active
<SW>434101434000434200
transmit
- IMPORTANT:
- Codes are not concatenated by default (default transmission
setting is "single codes only").
- You must select one of the "concatenated codes" transmission
options to send concatenated codes (see "transmit" section).
Code 128 / GS1-128 - ISBT 128 - transmit - Disable (*)
<SW>435A00
Code 128 / GS1-128 - ISBT 128 - transmit - Only transmit concatenated codes
<SW>435A01