User's Manual

Code 39 - Check digit - check digit transmission - Enable

<SW>425401

Barcode length

Length mode

- L1 = Codes with as many characters as specified by L1 and longer are read

(L2 and L3 are not used).

- L2 = Only codes that comply with the lengths specified by L1, L2, and L3 will

be read.

- L3 = Codes at least the length specified by L1 and no longer than the

maximum length specified by L2 are read (L3 is not used).

Code 39 - Barcode length - Length mode - L1 as Minimal length (*)

<SW>425300

Code 39 - Barcode length - Length mode - L1, L2, L3 as fixed length

<SW>425301

Code 39 - Barcode length - Length mode - L1 as min, L2 as max

<SW>425302

Reading range

- Applies a special algorithm for long-distance reading (default setting).

- Use the "normal" setting if distance reading is not required.