User's Manual

Laser Information

The Unitech MS916 series is certified in the U.S. to conform to the

requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of

IEC 825-1. Class II and Class 2 products are not considered to be hazardous.

The MS916 series contains internally a Visible Laser Diode (VLD) whose

emissions do not exceed the maximum limits as set forth in the above

regulations. The scanner is designed so that there is no human access to

harmful laser light during normal operation, user maintenance or prescribed

service operations.

The laser safety warning label required by the DHHS/IEC for the MS916

series' optional laser scanner module is located on the memory compartment

cover, on the back of the unit.

CAUTION! Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous laser light. Use of optical

instruments with the scanner, including binoculars, microscopes, and

magnifying glasses, with will increase eye damage.

This does not include

eyeglasses worn by the user.