User's Manual

Bar codes beginning with two or more zeros but not six zeros have the leading

'0100' stripped and the bar code reported as UPC-A. The UPC-A Preamble

parameter to transmit the system character and country code applies to

converted bar codes. Note that neither the system character nor the check digit

can be stripped.

Transmit Code ID Character

Parameter # 0x2D

A code ID character identifies the code type of a scanned bar code. This can

be useful when decoding more than one code type. The code ID character is

inserted between the prefix character (if selected) and the decoded symbol.

Select no code ID character, a Symbol Code ID character, or an AIM Code ID

character. The Symbol Code ID characters are listed below; see Appendix B,

Miscellaneous Code Information for AIM Code Identifiers.

• A = UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13

• B = Code 39, Code 32

• C = Codabar

• D = Code 128, ISBT 128

• E = Code 93

• F = Interleaved 2 of 5

• G = Discrete 2 of 5

• J = MSI