User's Manual

-
25
-
Parameter Defaults
Table 3-1 lists the factory defaults for all parameters. To change any option,
scan the appropriate bar code(s).
Table 3-1 Factory Default Table
Parameter
Parameter Number
(Hex)
Factory Default
Page
Number
Set Factory Default All Defaults 29
Beeper Volume 0x8C Medium 30
Beeper Tone 0x91 Medium Frequency 30
Laser On Time 0x88 3.0 sec 31
Aim Duration 0xED 0.0 sec 32
Trigger Mode 0x8A Level 32
Time-out Between Same Symbol 0x89 1.0 sec 34
Beep After Good Decode 0x38 Enable 34
Parameter Scanning 0xEC Enable 35
Parameter Pass Through F1h 71h Disable 35
Disable All Symbologies N/A N/A 36
Linear Code Type Security Levels 0x4E 1 37
Bi-directional Redundancy 0x43 Disable 38
UPC/EAN
UPC-A 0x01 Enable 39
UPC-E 0x02 Enable 40
UPC-E1 0x0C Disable 40
EAN-8 0x04 Enable 41
EAN-13 0x03 Enable 41
Bookland EAN 0x53 Disable 42
UPC-A Preamble 0x22 System Character 42
UPC-E Preamble 0x23 System Character 43
UPC-E1 Preamble 0x24 System Character 44
Convert UPC-E to A 0x25 Disable 45
Convert UPC-E1 to A 0x26 Disable 45
EAN-8 Zero Extend 0x27 Disable 46
Bookland ISBN Format F1h 40h ISBN-10 46
Code 128
Code 128 0x08 Enable 47
Code 39
Code 39 0x00 Enable 48
Trioptic Code 39 0x0D Disable 48