User's Manual
Table Of Contents
- Product Goal and Applications
- 3.Features and Benefits
- Comfortable and solid feel holding for easy use
- Wireless design eliminates cables for safer and more reliable scanning
- Enables users to format data before it is sent to the host computer eliminating costly modifications to the host software
- Fast reading and decoding of all major linear bar codes
- High tone beeper and strong illuminating LED
- Rechargeable Lithium-ion battery: 10 hours of wireless scanning performance.
- Unlicensed radio frequency transmission for maximum application flexibility
- Flexible setup using PC utility (Windows based) download, or by scanning a sequence of bar codes
- Interface to all major PCs, Apple computer and terminals.
- 4.Specifications
- Performance/Optics
- Mechanical design
- Color for main body: Dark Color.
- Drop Test: Scanner – 1.8m drop onto concrete over
- Housing (scanner and cradle): Rubber and ABS plastic with solid feel holding for demanding work environment
- Switch (with 1 million time micro switch life)
- Handle is smoothly contoured to fit all sized hands.
- A battery compartment located inside of gun grip is required.
- Battery pack can be replacement
- Electrical
- Communications
- Programming Method
- Environmental
- Cradle and Accessories
- 5.Schedule to be defined
4.2 Mechanical design
4.2.1 Color for main body: Dark Color.
4.2.2 Drop Test: Scanner – 1.8m drop onto concrete over entire temperature
range, Cradle – 1m drop onto concrete over entire temperature range.
4.2.3 Housing (scanner and cradle): Rubber and ABS plastic with solid feel
holding for demanding work environment
4.2.4 Switch (with 1 million time micro switch life)
4.2.5 Handle is smoothly contoured to fit all sized hands.
4.2.6 A battery compartment located inside of gun grip is required.
4.2.7 Battery pack can be replacement
4.3 Electrical
4.3.1 Decoder in Scanner: Unitech Hamster decoder chip for MS860
4.3.2 Decoder in Cradle: Unitech Hamster decoder chip
4.3.3 Indications for Scanner (using one dual color LED and one buzzer):
Read (LED Red), Good Read and Transmit to Host OK (LED Green
with one beep
), Battery Low (LED Red flash), Programming and
Configuration Status (
Green LED flashing), Cable Connection
Detection (
10 beeps when cable fall off cradle), Out of Range and
Cradle power off (
3 beeps)
4.3.4 Indications for Cradle (using three LED): Power On (
LED 1 Green),
Scanner Charging (
LED 2 Red), Charge Complete (LED 2 Green),
Receive data from Scanner (
LED 3 Red), Transmit data to Host OK
(
LED 3 Green)
4.3.5 Battery Recharge Time: below 4.5 hours
4.3.6 Operating Time: more than 10 hours under per 5 sec scan
4.3.7 Blue Tooth Module: Built in the Rainsun BT-20 of Scanner and
Cradle
4.3.8 Battery type: 1900mAH / 3.6V SANYO Lithium-ion
4