User's Manual

MS852B User’s Manual
1.5 Battery Charging
When you receive the package and use the MS852B for the first time, you will
need to fully charge the battery. It takes approximately 5 hours to fully charge
the battery. To charge the scanner with / without a cradle, please follow the
instructions below.
To charge MS852B, please connect USB type C cable to the USB port of a
host PC.
￭ Connect USB type C cable with MS852B
￭ Connect USB type C cable with the cradle
USB (Left )
-7- © 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered tr
ademark
of unitech Electronics Co., Lt
d.