User's Manual

Table Of Contents

Beeper Preferences

Scan a barcode below to select whether or not the digital scanner beeps after a

good decode. If selecting Do Not Beep After Good Decode, the beeper still

operates during parameter menu scanning and to indicate error conditions.

Beeper Duration

To select the duration for the beeper, scan one of the following barcodes.

Trigger Modes

Select one of the following trigger modes for the digital scanner:

 Standard (Level) - A trigger pull activates decode processing. Decode

processing continues until the barcode decodes, you release the trigger, or the

Decode Session Timeout occurs.

 Presentation (Blink) - The digital scanner activates decode processing when

it detects a barcode in its field of view. After a period of non-use, the digital

scanner enters a low power mode, in which the LEDs turn off until the digital

scanner senses motion.

 Host - A host command issues the triggering signal. The decoder interprets an

actual trigger pull as a Level triggering option.

 Auto Aim - This trigger mode turns on the LED aiming dot when the scanner is

lifted. A trigger pull activates decode processing. After 2 seconds of inactivity

the aiming pattern shuts off.

 Auto Aim with Illumination - This trigger mode turns on the aiming pattern

and internal illumination LEDs when the decoder senses motion. A trigger pull

activates decode processing. After 2 seconds of inactivity the aiming pattern

and internal illumination LEDs automatically shut off.