User's Manual
10
Wireless Connection of a Scanner to a PC
Human Interface Device (HID) Profile
MS840 is allowed to connect with PC designed with wireless technology. In order to
establish a proper connection between your computer with wireless technology and
the scanner, we suggest that you follow these step-by-step instructions:
1.
Turn on your computer.
2.
Because MS840 works in SPP by default, change the default profile to the HID
profile by scanning the HID Device barcode.
3.
When the change is successful, the LED of scanner flashes in blue.
4.
Make your PC with wireless technology search for the MS840 scanner. When your
PC locates the “HID SCANNER”, select it for the next step of pairing.
5.
Before successful pairing between the MS840 scanner and your PC is established,
you will get a pin code from your PC and will be requested to input the pin code.
After inputting the pin code, scan the Link Keys barcode as shown below:
Link Keys
6.
At this step, referring to the barcode table below, scan the pin code one after
another you got from your PC; for example, if you get the pin code “241657”, then
scan the barcodes “2” – “4” – “1” – “6” – “5” – “7” listed in the table in the order.
0
8
1
9
2
A
3
B
4
C
5
D
6
E
7
F
HID Device