User's Manual

Warm Boot via Software

Tap Start → Programs → Utilities →

BootMode.

Tap “Warm Boot”. The system will be warm

started.

Warm Boot via Hardware

Use a blunt pin (like an unfolded paper clip) to

stab the warm-

boot pinhole located on the

front of the HT682, above the keypad.

Cold Boot

A Cold Boot is used to reset the operating

system, restore the terminal back to factory

default, and reset the terminal after a

bootloader, keyboard, or kernel upgrade. You

are also allowed to stab the cold-

boot pinhole

to cold boot the HT682.

WARNING - Performing a Cold Boot will return the HT682 to its original factory settings!

warm-boot

pinhole

cold-boot

pinhole