User's Manual
Table Of Contents
- Preface
- About This Manual
- Table of Contents
- Chapter 1
- Getting Started
- Chapter 2
- Using the Keypad and Scanner
- Chapter 3
- Power system
- Chapter 4
- Data Communication
- Chapter 5
- Useful Utilities
22
Cold Boot via Software
To perform a Cold Boot via software, locate the
file Windows/Boot.exe.
Tap “Cold Boot”. The system will be re-started
and reset back to factory default.
You will need to recalibrate the screen and
reset the date and time.
Cold Boot via Hardware
1. Remove the Main Battery.
2. Switch OFF the Backup Battery.
3. Switch the Backup Battery back ON.
4. Insert the Main Battery.
5. The terminal will be cold started and reset back to factory default.
6. Recalibrate the screen and reset the date and time.