User's Manual

21
Warm Boot via Software
To perform a Warm Boot via software, locate
the file Windows/Boot.exe.
Tap “Warm Boot”. The system will be warm
started.
Warm Boot via Hardware
Use a blunt pin (like an unfolded paper clip) to
stab the warm-boot pinhole located on the
front of the HT680, above the keypad.
warm-boot
pinhole
Cold Boot
A
Cold Boot is used to reset the operating
system, restore the terminal back to factory
default, and reset the terminal after a
bootloader, keyboard, or kernel upgrade. You
are also allowed to stab the cold-boot pinhole
to cold boot the HT680.
cold-boot
pinhole
WARNING - Performing a Cold Boot will return the HT680 to its original
factory settings!