User's Manual
Table Of Contents
- Preface
- About This Manual
- Table of Contents
- Chapter 1
- Getting Started
- Chapter 2
- Using the Keypad and Scanner
- Chapter 3
- Power system
- Chapter 4
- Data Communication
- Chapter 5
- Useful Utilities
- Chapter 6
- Device Setting
- Appendix
- Worldwide Support
17
Warm Boot / Cold Boot / Factory Default
Warm Boot
Warm Boot is a reset to re-boot the HT660e without losing saved data. Perform
a warm boot when:
The terminal fails to respond.
After installing some software applications
After making changes to certain system settings, such as network cards
WARNING - Performing a Warm Boot will result in the loss of all unsaved
data!
Warm Boot via Software
Tap Start → Programs → Utilities →
BootMode.
Tap “Warm Boot”. The system will be warm
started.
Warm Boot via Hardware
Use a blunt pin (like an unfolded paper clip) to
stab the warm-boot pinhole located on the
front of the HT660e, below the keypad.
warm-boot
pinhole