User's Manual

Unitech Part Number: 400412
10
1.3.1. BAR
This option is use to configure individual symbologies for each barcode. After enter configuration menu,
the LCD will display the BARCODE Setup as shown below.
Press [MENU] key to toggle between settings. Press [SCAN] or [ENTER] key to set.
Setup decoding of HT580L supported bar code symbologies
Symbology Function Option Default
Code 39 Decoding ON/OFF ON
full ASCII ON/OFF OFF
Check Digit ON/OFF OFF
Start/stop Character Send/No-send NO SEND
I 2 of 5 Decoding ON/OFF ON
Check Digit OFF/On&Not send/ON&Send OFF
First digit SEND/NOT SEND SEND
Last digit SEND/NOT SEND SEND
Code 32 Decoding ON/OFF ON
First digit SEND/NOT SEND SEND
Last digit SEND/NOT SEND SEND
Matrix 2 of 5 Decoding ON/OFF ON
Check Digit ON/OFF OFF
Industrial 2 of 5 Decoding ON/OFF ON
Codabar Decoding ON/OFF ON
Check Digit ON / ON&Not Send / ON&SEND
/ OFF
OFF
CHINA POST Decoding ON/OFF ON
Check Digit ON / ON&Not Send / ON&SEND
/ OFF
OFF
CHINA POST Decoding ON/OFF OFF
CHECK DIGIT
MOD
SINGLE MOD 10/DOUBLE MOD
10/DOUBLE MOD 11+10
SINGLE
MOD 10
Check Digit ON&Send / ON&NOT SEND OFF
IDATA 2 of 5 Decoding ON/OFF OFF
Check Digit ON / ON&Not Send / ON&SEND
/ OFF
OFF
CODE 11 Decoding ON/OFF OFF
Check Digit ON / ON&Not Send / ON&SEND
/ OFF
OFF
EAN-13 Decoding ON/OFF ON
ISBN
ON/OFF OFF
ISBN
ON/OFF OFF
Leading Digit Send/No-send Send
Check Digit Send/No-send Send
EAN-8 decoding ON/OFF ON
Leading digit SEND/NOT SEND SEND
Check Digit SEND/NOT SEND SEND
UPC-A decoding ON/OFF ON
EXPEND to EAN-13 ON/OFF OFF
< BARCODE SETUP>
CODE 39
ON