Owner manual

POS4000
Document Number: POS4010 28
Document Title: Remote Code POS4000 Installation and Operations Manual
3.1.10.1 Set Unit Number
This command is used to set the unit number of the POS4000.
To select this command, scroll through the Multiple Unit sub-menu until "Set Unit Number"
appears and then press [ENTER].
Example to set the unit number of a POS4000 as 3:
[CMD]
[SYSTEM SETUP]
[3] (password 3)
[MENU UP/DOWN] until "Multiple Unit MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Set Unit Number" appears
[ENTER]
[3]
[ENTER]

Note:
The default unit number is 1.
3.1.10.2 Controller/Remote
This command is used to designate a POS4000 main console as either a controller console or a
remote console.
To select this command, scroll through the Multiple Unit sub-menu until "Controller/Remote"
appears and then press [ENTER].
Example to designate a main console as a REMOTE Console:
[CMD]
[SYSTEM SETUP]
[3] (password 3)
[MENU UP/DOWN] until "Multiple Unit MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Controller/Remote" appears
[ENTER]
[2] to select Remote
[ENTER]

Note:
The default is for the console unit to be a controller.
3.1.10.3 Set Number of Bays and Consoles
This command is used to define the number of customer interfaces (carwash bays) and remote
POS4000s that are present at a site.