Owner manual

POS4000
Document Number: POS4010 16
Document Title: Remote Code POS4000 Installation and Operations Manual
3. After entering the correct password, you can scroll through the secondary
menu list that follows:
• Set System Time
• Configure a Group
• Set Code Age Warning
• Set Code Length
• Disable Cashier Key
• Set Serial Baud Rate
• Set Languages
• Set Program Relays
• Cash Upgrades MENU->
o Set BUYUP Mode
o Set Coin/Bill Values
o Set Dispense Value
• External POS MENU ->
o Set POS Offset
o Set EXT. POS Type
o Set POS Max Washes
o Set Send Code Age
o Reverse order
• Multiple Unit MENU ->
o Set Unit Number
o Controller/Remote
o Set # Bays/Consoles
o Prog Remote Consoles
To execute one of the secondary commands, scroll through the secondary menu until the
command of interest is displayed, and then press the [ENTER] key. The final three entries in the
secondary menu each allow access to a sub-menu. In addition to the choices shown for each
sub-menu, there is also an item that allows you to "Return to SETUP MENU".
The following information is provided in the System Configuration Report:
• Software Version and date of release
• Car Wash manufacturer compatibility
• Console language - used for text displayed on main console