Owner manual

POS4000
Document Number: POS4010 2
Document Title: Remote Code POS4000 Installation and Operations Manual
• Fleet related functions (Account Info button)
• Void code (Void Code button)
• Code management functions (Memory button)
• Check code (Check Code button)
• Reprint Receipt
• Code Length (Maximum Code Length)
• Code Age (Enter # of Days Good)
• Cash Upgrades
• Ext POS Multi-use code setup
• Number of Bays under Set # Bays/Consoles
• Optioning - disabled only when using 6 digits codes
1.1.2 Remote Code Changes That Affect Reporting
On the System Configuration Report:
• Multi-use codes will not be there with Remote Code enabled
• Remote Code parameters will be there with Remote Code enabled
Audit Counts
These items are still displayed when Remote Code is enabled:
• Code Usage and Wash Activation Summary
• Ext Pos Multi-Use Code Summary
• Vehicles Washed Summary
• Wash Time Info
• WSII Fleet Usage Info
• WSII Fleet Sales Info
• CIN Code Failures
• Codes Void
• Coin Box Summary
• Coin Box Pricing
1.2 Enable and Setup Remote Code
Note: A remote POS4000 running the “Ext POS at remote POS” software option cannot be
used as a remote unit with a Master POS using Remote Code.
1.2.1 Setting Up the Primary/Master POS4000
To enable the Remote Code function at the Primary/Master POS4000 console:
System Setup -> Remote Code: 1=enable, 0=no
The following parameters MUST be set in order for Remote Code to function properly: