User Manual

POS4000

Document Number: POS4003 81

Document Title: POS4000/V2 Operations Manual

the secondary menu that follows:

Change Wash Name

Set Reg. Postscript

Set Dis 1 Postscript

Set Postscript All $

To execute one of the secondary commands, scroll through the secondary menu

until the command of interest is displayed, and then press the [ENTER] key.

6.13.1 Change Feature Name

To change the name (or label) of a feature, scroll through the Setup secondary

menu until "Change Wash Name" is displayed. Then press the [ENTER] key.

At this point, the top line of the display will prompt you to Enter Label Name and

the second line will display the current name of the feature. By using the

alphanumeric characters on the keys (see appendix II), you should type in the

new name of the feature.

If you press [ENTER] when the current name is displayed,

WARNING!!

ou will chan

e the label to be BLANK.

The [BOLD], [CENTER] and [RED] keys have no effect on

wash names.

Note: