User Manual

POS4000
Document Number: POS4003 75
Document Title: POS4000/V2 Operations Manual
Example to void code 123450:
[CMD]
[VOID CODE]
[1] (password 1)
[ENTER]
[1][2][3][4][5]
[ENTER]
6.10 Memory Information
The memory management command provides you with a means to review and
control the customer code memory of the POS4000. To select this command,
press the [CMD] key followed by the [MEMORY] key. The console will prompt for
password 2. Once the correct password is entered, you can scroll through the
secondary menu that follows:
Print Valid Codes
Print Used Codes
Clear ALL Valid
Clear ALL Used
Clear Old Codes
To execute one of the secondary commands, scroll through the secondary menu
until the command of interest is displayed, and then press the [ENTER] key.
6.10.1 Print Valid Codes
This command can be used to print all valid codes. To execute this command,
scroll through the MEMORY secondary menu until "Print Valid Codes" appears.
Then press [ENTER].
When this command is executed, the console will display the total number of
valid codes in memory and then prompt for the number of codes that you want
printed. Type the number of codes you want followed by the [ENTER] key. The
console will print that many of the most recently issued valid codes.
This command does not give access to the fleet account
information.
Note: