User Manual

POS4000
Document Number: POS4003 54
Document Title: POS4000/V2 Operations Manual
[ENTER]
[MENU UP/DOWN] until "Set Unit Number" appears
[ENTER]
[3]
[ENTER]
6.2.11.2 Controller/Remote
This command is used to designate a POS4000 main console as either a
controller console or a remote console. Refer to APPENDIX VII for additional
information.
To select this command, scroll through the Multiple Unit sub-menu until
"Controller/Remote" appears and then press [ENTER].
Example to designate a main console as a REMOTE Console:
[CMD]
[SYSTEM SETUP]
[3] (password 3)
[MENU UP/DOWN] until "Multiple Unit MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Controller/Remote" appears
[ENTER]
[2] to select Remote
[ENTER]
The default unit number is 1.
Note:
The default is for the console unit to be a controller.
Note: