User Manual

POS4000

Document Number: POS4003 53

Document Title: POS4000/V2 Operations Manual

6.2.11 Multiple Unit MENU->

Refer to Appendix VII for multiple unit configuration procedures and

application notes.

This sub-menu is used to configure the multiple customer interface (carwash)

and multiple Point-of-Sale (POS) capabilities of your system. It contains 4 sub-

menu items:

Set Unit Number

Controller/Remote

Set # Bays/Consoles

Prog Remote Consoles

To execute one of the sub-menu commands, first select "Multiple Unit MENU->"

from the SYSTEM SETUP menu, and then scroll through the sub-menu until the

command of interest is displayed and then press the [ENTER] key.

6.2.11.1 Set Unit Number

This command is used to set the unit number of the POS4000. Refer to

APPENDIX VII for additional information.

To select this command, scroll through the Multiple Unit sub-menu until "Set Unit

Number" appears and then press [ENTER].

Example to set the unit number of a POS4000 as 3:

[CMD]

[SYSTEM SETUP]

[3] (password 3)

[MENU UP/DOWN] until "Multiple Unit MENU->" appears

This command is used to configure an OPTIONAL FEATURE o

Note:

the POS4000. If this feature is not present in your system, you will

not be able to execute these commands.