User Manual

POS4000
Document Number: POS4003 48
Document Title: POS4000/V2 Operations Manual
6.2.10.2 Define External POS Type
This command is used to define what type of external Point-of-Sale equipment is
present and connected to the POS4000. Refer to APPENDIX VI for additional
information. To select this command, scroll through the External POS sub-menu
until "Define EXT. POS Type" appears and then press [ENTER].
Example to set the external POS type as 3:
[CMD]
[SYSTEM SETUP]
[3] (password 3)
[MENU UP/DOWN] until "External POS MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Define EXT. POS Type" appears
[ENTER]
[3][ENTER]
If the external POS type is set to 1 or 2, the current EXT POS
settings will print out with a mapping of the Carwash type given vs.
the carwash type requested.
Note:
6.2.10.3 Set POS MAX WASHES
This function is used to modify the commands received by an external point of
sale device such as pump equipment. These commands are configured to ask
for more wash types than are available. You should only change this value when
instructed to do so from an application note or a Unitec service technician. The
default value is 0 (disabled). This value only limits the number of wash types that
can be requested by an External POS device, not the number of wash types that
can be sold via the console or coin box (cash or buy ups).
This feature is for use with POS 1 and 2 onl
Note:
y
.