User Manual

POS4000

Document Number: POS4003 45

Document Title: POS4000/V2 Operations Manual

6.2.9.3 Set Dispense Value

This command is used to set the value of coins that are dispensed as change by

the AUTOTEC or the E-Systems 4000 at the entrance of the carwash. Unless

your POS4000 main console is used with the Hamilton AutoTec or the Unitec E-

4000, this command will have NO effect upon the operation of your system. To

select this command scroll through the Cash Upgrades sub-menu until "Set

Dispense Value" appears and then press [ENTER].

Example to set the value of dispensed coins as $1.00:

[CMD]

[SYSTEM SETUP]

[3] (password 3)

[MENU UP/DOWN] until "Cash Upgrades MENU ->" appears

[ENTER]

[MENU UP/DOWN] until "Set Dispense Value" appears

[ENTER]

[1][0][0]

[ENTER]

6.2.9.4 Set Dispense Mode (E-System 4000 only)

This command is used to set criteria for when the E-System 4000 coin box will

dispense change. This function will not affect the change making ability for a

Hamilton Autotec. The dispense modes are defined as follows:

Dispense Mode Description

0 No change available

1 Change available after wash activated

Change is available at the escrowed amount only. If

the amount entered is equal to the value of a wash

(the wash armed) then the amount will not be

refunded. Only the amount between the wash prices

is refunded.

The default value is $0.25.

Note:

alid values are 25,50,100, and 200.