Manual

POS4000
Document Number: POS4007 107
Document Title: POS4000/V2 WSII Operations Manual
After the last change is made, a printout should follow that looks like this. (Note if using groups
Feature returned will be G1, G2 etc).
Serial Interface = POS 2 (this may be different)
POS Feature offset = 0 down
POS Max Washes = 3 (or 4 if using 4 washes)
Send Code Age: Disabled
Reverse order: Enabled
EXT Default
Wash Disc Feature
Requested Level Returned Name
1 0 P3 Super Wash
2 0 P2 Deluxe Wash
3 0 P1 Express Wash
4 0 P3 Super Wash
5 0 P2 Deluxe Wash
6 0 P1 Express Wash
7 0 P3 Super Wash
8 0 P2 Deluxe Wash
9 0 P1 Express Wash
10 0 P3 Super Wash
11 0 P2 Deluxe Wash
12 0 P1 Express Wash
This will allow 3 washes to be sold at the pumps ($6, $5, and $4).
To test this system:
• Get a code from each of the 3 possible wash types from the pumps then do a code check on
each verifying the wash names match.
• Get a code for each of the 3 possible wash types at each possible discount from the Register
then do a code check on each verifying the wash names match. This verifies the EXTPOS
connection is configure properly
• Print a code at the regular price for each of the 3 wash types from the POS4000 then use the
washes at the entry system. This verifies the wash wiring to the Mark VII was done properly.
• Pay for each of the 3 washes at the entry system using cash and verify the proper wash type
was given. This verifies that the Buttons on the Autotec are configured properly.