Manual

EZTRAK
Document Number: EZT1001 27
6. Click Properties.
7. Select “Use the Following IP Address” then fill in the following network
information:
IP Address: 192.168.0.110
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
8. Leave the DNS information blank.
9. Click OK.
10. Plug the CAT5 cable from the pay node in the EZ Trak into the coupler. Plug one
end of the cross-over cable into the coupler and the other end into your laptop.
11. Open an Internet browser window and enter the default IP address from Step 1
(http://192.168.0.108).
Document Title: EZ Trak Installation and Operations Manual