User manual
Please read through these instructions carefully before using this product. They contain
all the important information you need to familiarise yourself with its functions. Retain
these instructions in case you have any questions during the life of the product and pass
them on to other users or subsequent owners.
This compressor has been designed mainly for inflating car and light commercial vehicle
tyres to the tyre pressures recommended by the vehicle manufacturer. It may also be used
forleisureproductssuchasairbeds,aircushionsandballs.Tomakethejobeasierinthe
dark, the compressor has a built-in LED work light. This LED work light is not suitable for
lighting living areas.
1 Transparent cover
2 LED base
3 LED lights
4 Top cover
5 Decorative panel
6 Bottom cover
7 Compressor28mm
8 Support pads
9 Adapters
Vibration dampers
ON/OFF buttons
Buttons
Pressure sensor
• Useonlytheaccessoriessuppliedwiththeproduct.
• 12Vcablewithplugforthecigarettelighter
• Compressedrubberhosewithscrewlockvalve
• 1adaptereachforballsandairbeds.
• Checkthatthevehicle‘sbatteryhasenoughchargetooperatethecompressor.
• Donotletthecompressoroperateforlongerthan15minutesatatimeortherewillbea
risk of overheating. Then leave it to cool for at least 30 minutes.
• Donotleavethecompressorunattendedduringtheinflationprocess
• Donotusethecompressorwhilsttravelling
• Thecompressormaybecomehotduringoperation
• Operateonlywith12Vdirectcurrent
• Operateonlyinadryenvironment
• Checkthedeviceforanydamageeverytimebeforeusingit.Donotstartupthedeviceif
any damage or malfunction has been detected or if it has come into contact with water.
• Repairsmayonlybecarriedoutbytrainedstaff.
• Donotcarrythedevicebyitscableorpullonthecabletotakethedeviceoutofthe
socket. To take the cable out of the socket, grip the 12 V plug.
• Donotwindthecablearoundsharpcornersoredges
• Donotoperatethedevicewithwethands
• Beforeanyroutinecleaningormaintenanceremovethedevicefromthesocketandfirst
allow it to cool down sufficiently.
• Childrenmustnotplaywiththedevice.
• Suitableambienttemperatureforuse:-15to+55°C.
Intended use
Parts list
Accessories
Safety instructions
Original operating instructions
• Positionthetyresothatthevalveisaslowaspossible.
• Screwtherubberhoseconnectortothetyrevalve.Ifthetyreiscompletelyemptyofair,
thevehicleshouldberaisedalittlewithajacksothatthereisnoadditionalcounter-
pressure acting on the empty tyre.
• Puttheplugintothecigarettelighter(12Volt).Thecompressorisnowreadytooperate.
• Youcansettheunitofmeasurementforpressurewiththe„SET“button(BAR,PSI,KG/
CM³,KPA)
•Setthedesiredairpressurewiththe„+“and„-“buttonsandstartthecompressorwith
the„COMPRESSORON“button.Thedevicewillswitchoffautomaticallywhentheset
pressure is reached. The inflation process may be interrupted by pressing the
„COMPRESSOROFF“button.
• Afteruse,taketheplugbackoutofthecigarettelighter.
• Selecttheappropriateadapterandconnectthecompressortotheitemtobeinflated.
• Putthepluginthecigarettelighter(12Volt).Thecompressorisnowreadytooperate.
• Youcansettheunitofmeasurementforpressurewiththe„SET“button(BAR,PSI,KG/
CM³,KPA)
• Setthedesiredairpressurewiththe„+“and„-“buttonsandstartthecompressorwith
the„COMPRESSORON“button.Thedevicewillswitchoffautomaticallywhentheset
pressure is reached. The inflation process may be interrupted by pressing the
„COMPRESSOROFF“button.Avoidoverinflatingtheitembeinginflatedasthismay
cause it to burst!
• Afteruse,taketheplugbackoutofthecigarettelighter.
• Toswitchtheworklightonandoffpleasemovetheswitchtothe„LIGHTON“or
„LIGHTOFF“position.
• Donotlookdirectlyintotheworklight.
• Ifthehousingbecomesdirty,wipeitwithadampcloth.Donotimmersethedevicein
water.
• Operatingvoltage: 12VDC
• Maximumpressure: 10bar
• Airflowrate: 22litres/min
• Power: 0.096–0.120kW,0.214kg
• Rotationspeed: 16,000rpm
• Noiselevel(wheninflating): <85dB
At the end of its working life do not dispose of this product in the domestic refuse
butatthelocationssetupforthereturnofusedelectricalequipment.
1
2
3
4 5 6
7
8
9
10945_Bed_A5_131218.indd 4 27.01.14 13:39