User guide

Section 7: SITE
7-11
Page Wait
This field determines the duration (in seconds) of the paging feature.
This is the time a caller can wait on the line while
e
maGEN
is paging
a subscriber. If the subscriber has not contacted the system within
this amount of time, the caller is prompted that the subscriber is not
available.
7.10 CALL OUT PARAMETERS ON THE SITE --> SETTINGS SCREEN
When
e
maGEN
performs a Call Out, such as wake-up call, remote
message notification, etc., it dials out on outside trunk circuits. There
are two different results that
e
maGEN
may receive other than an
answered call.
Busy
This field controls the time interval between Call Out attempts for a
Busy condition.
No Answer
This field controls the time interval between Call Out attempts for a
No Answer condition.
Action:
Check all days to be considered weekdays.
Legal values:
1 to 9999 sec
Default:
Blank
Action:
Enter the desired time duration.
Legal values:
1 to 999 minutes
Default:
3
Action:
Enter desired number of minutes to wait be-
fore retry.
Legal values:
1 to 999 minutes
Default:
30
Action:
Enter desired number of minutes to wait be-
fore retry.