User guide

76-110-0887/0, Issue 1
5-14
• the surcharge per call.
The cost per minute is calculated in one minute increments.
For example:
If the cost per minute is 15 cents
and the call duration is 45 seconds,
the call cost is 15 cents.
If the call duration is 1 minute and 5 seconds,
the call cost is 30 cents.
Call cost
If you entered information in the cost per minute section, above,
you can select calls by cost according to the following criteria:
• Fill in only the from field -- to view calls equal or above a certain
cost.
• Fill in only the to field -- to view calls equal or below a certain
cost.
• Fill in both the to and from fields -- to view calls between a range
of numbers.
Called number
Fill in the called number field -- to view calls containing the given
number. The called number field refers both to:
• numbers dialed on outgoing calls
and
• caller ID numbers in incoming calls.
Period
Enter a valid range of dates – from a certain date/time to a certain
date/time.
By default, the end date is today’s date.
Sorting Calls
The full report will show all legs of a call. If you selected calls for a
particular extension or trunk, full report will show all calls that the
extension or trunk took part in plus all other legs of these calls.
The summary report will show only the first leg of each call, or the
legs, that a particular extension or trunk took part in.
You can sort the summary report by fields.
A sample SMDR report is shown in Figure 5-5, below