User guide

76-110-0887/0, Issue 1
5-12
You can run it while connected over an IP connection. Double click
the
e
maGEN
Monitor icon. You will be prompted for a host name.
Enter the IP address of
e
maGEN
. You will see the status of all ports.
You can start or stop a port by right clicking the port.
5.6
e
maGEN
CONTROLLER
The
e
maGEN
Controller Main Menu screen -- shown in Figure 5-3,
below -- is the top of the pyramid of all administration configuration
and definition screens.
Figure 5-3
e
maGEN
Controller Main Menu screen
See a detailed guide to
e
maGEN
screens and instructions in Figure
6-2 of Section 6, below.
5.7
e
maGEN
SYSTEM MESSAGE DETAIL RECORDING (SMDR)
5.7.1 Accessing SMDR Reports
1. Log in to the
e
maGEN
T3 administration web page.
2. Click the SMDR link.
The SMDR Reports definition screen, shown in Figure 5-4,
below.
5.7.2 Generating a report
To generate a report:
1. Fill in the fields relevant to your query.
2. Press the [Generate Report] button, at the bottom of the
screen.
The fields are compounded, so you can create a complex query
by filling in multiple fields.
e
maGEN Controller
Main Menu
Web Controller
Reports
SMDR