User guide

Section 5: SYSTEM ADMINISTRATION
5-7
NOTE
It is recommended to wait approximately 15
seconds after stopping a service before
restarting it, to allow all the program com-
ponents to shut down.
Option number 5 will allow you to select the startup mode for each
server.
When using the
e
maGEN
VM main voice processing server, only,
you can select Manual or automatic. The default setting is automatic,
which means the server will start to work upon startup of the system.
5.4.4 Network configuration -- option 4
You can use the
e
maGEN
T3adm to configure the IP address of
e
maGEN
without any need for in depth knowledge of the linux op-
erating system.
1. Select option 4 of the
e
maGEN
T3adm main menu and provide
the required network information:
NOTE
Do not use DHCP (Dynamic Host Configu-
ration Protocol).
• The IP address for this machine
• The Network subnet mask
• The Host name – by which you want to refer to this machine
• The Gateway -- through which the system can reach the
public internet
• The Domain Name Server (DNS) which is used to resolve
internet addresses
2. After changing this information, execute the shut down proce-
dure and reboot the machine, for the changes to take effect.
3. Make sure to note the changes to allow further access through
IP to this machine.
4. If you fail to connect after reboot using telnet, you can resort to
the Telnet method using a null-modem cable or a standard
modem.
5.4.5 System Backup -- option 5
To backup the system:
1. Select option 5 of the
e
maGEN
T3adm menu.
This will copy all the system files to a backup location.