User guide

Section 5: SYSTEM ADMINISTRATION
5-3
7. Click the “done” button (in Windows 98 click the “Continue” but-
ton), after which a new connection icon should appear in
the local machine's task bar, which means you have established
a TCP/IP connection with the remote machine.
8. Open an Internet browser, and enter in the URL line the remote
IP address (192.168.0.100) to see the Web Controller adminis-
tration site.
B. Creating a dial-up account from windows 2000
1. Right-click “My Network Places”, select “Properties”.
2. Double-click “Make new connection”.
3. Click “Next”.
4. Select “Dial up to private network” and press “Next”.
5. Enter
e
maGEN
modem number.
6. Indicate if the connection is for all user or for current user only
and click “Next”.
7. On the “internet connection sharing” page click Next.
8. Enter the connection name (e.g. “tenecs”) and press “Finish”.
9. Right-click the connection you just created (inside the “Network
and dial-up connections” window).
10. Click the “Security” tab.
11. Select “Advanced” from the “Security options” and click on “Set-
tings”.
12. Select “Allow these protocols” and check all the specified proto-
cols.
13.Make sure the last check box, “For MS-CHAP…”, is not checked
and click “OK”
14.Click “Yes” on the dialog box which then appears
15.In the “Security” tab, check “Show terminal window” (at the bot-
tom of the tab) and click “OK”
C. Creating a dial-up account from windows 98
1. Double-click “My Computer”.
2. Double-click “Dial-up networking”.
3. Double-click “Make new connection”.
4. Provide the connection name.
5. Select a modem you want to connect with.
6. Click “Configure”.
7. Click the “Options” tab.
8. Check “Bring up Terminal-Window after dialing”.