User guide

76-110-0887/0, Issue 1
3-32
NOTE
Restore will take affect from files under
/../usr/backup only. Do not change the
folder name or directory path.
******************Restore Completed ******************
3.23
e
maGEN
SYSTEM DETAILED
VERSION UPGRADE INSTRUCTIONS
3.23.1 To view your current system version.
1. Connect to the system with the Telnet command:
telnet [system ip].
2. Type system login user name: tenecs
3. Type system login password: tenecs
4. Type the command SU -- to login as administrator.
5. Type the administrator password: tenecs
6. Type the command: T3adm
7. Choose option 8 -- to verify installation.
8. The system will show you its current version and will check the
installation [T3 10.1.8].
9. Press Enter -- to finish.
10. Press Q -- to quit to Linux shell.
3.23.2 Connect to the
e
maGEN
voice mail with FTP
1. Connect to the system with the FTP command:
ftp://Root:tenecs@[system ip]
2. Copy the new version to the
e
maGEN
voice mail folder, using
the copy paste command.
3. Close the FTP session.
3.23.3 Extract and upgrade
1. Return to the Telnet session.
If the Telnet session is closed, open it again, by following steps 1
through 5 in Section 3.23.1, above.
2. Type the command ls
[ls is like the dir command], you need to see the upgrade file you
transfer.
3. Type the command: tar xvzf [upgrade filename].
This will extract the installation file to the name directory.
4. Type the command cd [upgrade directory name].