User guide

76-110-0887/0, Issue 1
3-28
3.21 INSTALLATION INSTRUCTIONS FOR ADDING ELEMENTS TO
THE
e
maGEN
SYSTEM
3.21.1 How to add voice ports
1. Run t3adm
2. Select x (extra stuff)
3. Select option 5 configure voice board
4. Follow instructions for adding voice boards
5. Replace the a1 file for support of more voice ports
6. Shut down system
7. Add voice boards (make sure to strap the jumpers properly)
8. Start system
3.21.2 How to add fax ports
1. Power off the system and insert the fax board
2. Boot the system
3. Run t3adm
4. Make sure you have a1 license for fax
5. Select x (extra stuff)
6. Select option 3 configure fax
7. Select option 2 add modem
8. Follow instructions for adding modem.
Make sure to put in local fax number and fax name.
9. Reboot system
3.21.3 How to add modem
1. Power off the system and insert the modem card.
You can also use an external modem, without turning the system
off.
2. Boot the system
3. Run t3adm
4. Select x (extra stuff)
5. Select option 2 define modem port
6. Select com port (for internal US Robotics use com 4).
3.21.4 How to add Unified messaging Push, POP, IMAP and applet
1. Make sure network parameters are working perfect (ping
another machine on the network).
2. Run t3adm