User guide

76-110-0887/0, Issue 1
3-20
3.17 CHECKING CABLING
After completing hardware installation, check all the wiring and
cables for integrity and secure connections. Particular attention
should be paid to the following items:
• The audio connections between:
• each
e
maGEN
-PC voice mail card and the audio junction
box;
• the audio junction box and the MDF.
• The data cabling between the
e
maGEN
-PC voice mail card and
the OCD card.
• That all the connections to the
unit
e
system cabinet are firmly in
place.
3.18 CHECKING PRINTED CIRCUIT CARDS
Check that:
• The OCD card(s) in the
unit
e
system cabinet, on which the
MIM(s) dedicated to
e
maGEN
is/are mounted, is/are firmly
seated in the correct slot(s) in the
unit
e
system cabinet, as
defined in system programming;
• The MIM(s) dedicated to
e
maGEN
is/are securely mounted on
the OCD card(s), as defined in
unit
e
system programming;
• The
e
maGEN
-PC card(s) in the
e
maGEN
-PC is/are all firmly
seated in its/their correct slot(s);
• The jumpers on the
e
maGEN
-PC card(s) are set to the correct
positions;
• The Application card, if present in the
e
maGEN
-PC-PC, is firmly
seated in its slot;
3.19 CHECKING SYSTEM CABINET TO MDF CONNECTIONS
Check that the cable connectors from the MDF to the OCD card(s)
in the system cabinet are secure at both ends.