User guide

76-110-0887/0, Issue 1
3-2
•
unit
e
system programming for
e
maGEN
, as described in Sec-
tion 19, below, utilizing the
unit
e e
manager
.
3.3 INSTALLATION PREPARATIONS
3.3.1 Reading the documentation
Prior to setting up the
e
maGEN
system, read through this manual
and familiarize yourself with its content and the system compo-
nents.
3.3.2
e
maGEN
-PC printed circuit cards
The
e
maGEN
-PC must be fitted with
e
maGEN
printed circuit
cards, depending on the number of
e
maGEN
ports you wish to
establish in your system.
There are three types of
e
maGEN
four telephony port, single slot,
half-sized, ISA compatible voice processing cards, manufactured by
Brooktrout Technology, to choose from, in order to set up your sys-
tem, as follows:
• Prelude Quartet card;
• Vantage Volare card;
• RDSP 432 card.
NOTE
In systems having more than one card, four
port expansion cards may be used, since
data support is already provided by the first
card. In a 16-port system, a minimum of two
data cards is required.
The
e
maGEN
-PC can thus have any even number configuration of
e
maGEN
ports -- from 4 to 28 ports.
Cards are assigned identification numbers from 1 to 4 for port pro-
gramming assignment purposes. Port assignment is done in
unit
e
system programming, utilizing the
unit
e e
Manager
.
3.3.3 OCD card preparation
e
maGEN
can be configured with up to 28 voice mail ports, in all
unit
e
systems.