User guide

Section 11: MAILBOX
11-19
•,: Pause
Type
This field tells
e
maGEN
what dialing method to use. The choices
are:
• Internal: Used for dialing internal extension numbers in the local
PBX system.
• External:Used for dialing numbers external to the PBX system.
e
maGEN
will automatically use a dial-out prefix programmed in
the PBX Parameters --> Dial Stings --> Outbound Calls Prefix
field. After dialing,
e
maGEN
will analyze the results of the dial-
ing, and decide if another call is needed (busy, no answer) or
there is no need for another call (connect and user identification).
• Beeper: This choice tells
e
maGEN
that this number reaches a
beeper service.
e
maGEN
will not analyze the results. Rather, it
will stop dialing after the first try.
• OpBeep: For paging services that require a verbal message (as
opposed to touch-tone signaling). The system will call the paging
service and play a prerecorded message (e.g. "Subscriber num-
ber xxx -- call the voice mail").
Use the personal options menu, on your telephone set, to record
the operator greeting.
• Email: Send a notification in the form of an email to an email
address specified in the bin field.
Email uses bin 1 only.
11.8.2 Schedule table entries
Each mailbox can use up to 7 different schedules to determine how
its Remote Message Notification is handled. The entries are made
on a line-by-line basis. The lines are referred to as Schedule-lines.
Each schedule-line has its own day schedule, number of regular &
priority messages, the hours that this schedule line is active, as well
as three different bins (for the proper destination) which may be ac-
Legal values:
Up to 49 characters 0 / 1 / 2 /.9 / * / # / use ","
for pauses
Default:
Blank
Action:
Enter the phone number of your choice, and/
or additional dialing characters -- see below
-- for each bin number.
Legal values:
Internal / External / Beeper / OpBeep / Email
Default:
Blank
Action:
Select from the drop box.