User guide

76-110-0887/0, Issue 1
11-18
sage.
NOTE
The Mailbox owner can activate/deactivate
this feature from the personal options
menu, on their own telephone sets.
11.8.1 Bin information fields
Bin
This is the bin location that will be placed in the scheduler table for
timed activation.
Phone
In this field you enter the phone number that is the destination to be
dialed for message notification (associated with this particular bin
number).
It is not necessary to enter a dial-out prefix like 9 for the local PBX
dial-out group. Only prefixes that are NOT normally used, such as
those to access a different PBX trunk group like 80, need to be en-
tered here. If the destination is a pager, you can enter additional
characters to be dialed after the necessary number of Pauses.
You can also enter an email address to which you want to send a no-
tification. Please note that an email is only sent once, and does not
repeat according to the schedule.
Dialing characters
To make the dial code generic, some of the following characters
can be used to indicate certain parameters:
• E or X: indicates the extension number to dial
•M: Mailbox
• T: Total number of messages
• N: number of new messages
• S: number of saved messages
•&: Flash
Legal values:
Y / N
Default:
Unchecked
Action:
Click the box to check or uncheck.
Legal values:
Fixed numbers Bin1 to Bin7
Default:
Fixed numbers Bin1 to Bin7
Action:
None