User guide

Section 9: PBX
9-23
Channels
This field determines for which channels this com port is receiving
data.
e
maGEN
can be set to receive data from different devices,
each device corresponding to different channels (voice ports).
NOTE
It is necessary to assign 10 more channels
than actual voice channels, as the system
also uses virtual channels for some opera-
tions.
Baud rate
This field determines the baud rate in which the signaling occurs.
Parity
This field determines the parity of the data interchange. It can be
None, Even or Odd.
Legal values: Internal
For Integration with
Telrad Systems.
ANI
ANI protocol -- not used for
e
maGEN
.
This should always be internal.
SMDI1
SMDI protocol -- data without ring.
SMDI2
SMDI protocol -- data before ring.
SMDI3
SMDI protocol -- data after ring.
Default:
None
Action:
Select from the drop list
Legal values:
0 - Maximum number of channels
Default:
0 - 0
Action:
Enter channel numbers
Legal values:
above 300
Default:
9600
Action:
Select the baud rate from the drop list.
Legal values:
N / O / E
Default:
N
Action:
Click the button.