User guide

76-110-0887/0, Issue 1
9-22
Department
This field tells
e
maGEN
what department to use when the related
trunk code is received by
e
maGEN
.
9.14 RS232 INTEGRATION TABLE
Figure 9-4 PBX --> Serial Integration screen
e
maGEN
supports four different com ports, which can be set inde-
pendently. The com port default is com1. Each of the following fields
is applicable in all four com ports.
Active
This field determines if the port is available for data send and receive
or it is idle.
Protocol
This field determines the protocol in which data will be received and
should be sent.
The legal values of the options for different protocols are listed be-
low.
Legal values:
1-9
Default:
Blank
Action:
Select from the drop list.
Legal values:
Checked/Unchecked
Default:
Unchecked
Action:
Click the field to check/uncheck.