User guide

76-110-0887/0, Issue 1
9-18
No answer
The caller will be sent directly to the message-taking menu for the
mailbox which
e
maGEN
attempted a transfer to but received a no-
answer condition.
Take msg.
The caller will be sent directly to the message-taking menu for the
mailbox which
e
maGEN
attempted a transfer to, but received a re-
fusal such as a do-not-disturb signal.
Enter M.B.
The caller will be sent directly to get password prompt. This condition
occurs when there is a MSG button set up on the subscriber's tele-
phone set which may be pressed in order to immediately access
e
maGEN
. This action will direct the subscriber immediately into the
subscriber's menu.
Monitor
This action tells
e
maGEN
to record whatever audio is currently
present on the port as a new message in the designated mailbox.
Hang up
This action tells
e
maGEN
to immediately hang up and release the
port for new calls.
Hand shake
This action tells
e
maGEN
that it has a valid connection with a given
PBX. This string consists of two parts; the received string, comma
and the return string.
Ignore
This action tells
e
maGEN
to ignore the related series of digits if they
are received.
Transfer
This action tells
e
maGEN
to transfer the caller to the received ex-
tension, as if he entered through the caller menu.
Line
This action tells
e
maGEN
to check in the trunk integration table
which department corresponds with the received trunk, and prompt
the caller according to this department’s protocol.
Announce
This action tells
e
maGEN
to play a message with the number re-
ceived from the PBX and then hang up.
Getuser#
The user will be prompted to enter their mailbox number, as if dialing
# from the main menu.