Installation manual

30
REPAIR PART LIST – P2HMX12F08001
ITEM DESCRIPTION
1 Assembly. Left Side Panel (Tan)
2 Assembly, Right Side Panel (Tan)
3 Assembly, Rear Panel (Tan)
4 Assembly, Blower Division Panel
5 Base Panel Assembly
6 Inner Front Panel Assembly
6A Aux. LImit Control (150 Deg. Up Pos.)
6B Aux. LImit Control (140 Deg. Low Pos.)
7 Inner Front Panel Assembly
7A Primary Limit Control (180 Deg.)
7B Limit Support Assembly
8 Blower Access Door (Tan)
8A Door Handle
9 Front Door Panel (Tan)
10 Top Panel (Tan)
11 Heat Exchanger Assembly
12 Firepot Bracket Assembly
13 Replacement Combustion Chamber
14 Rear Panel Baffle
14A Left Side Panel Baffle
14B Right Side Panel Baffle
15 Oil Burner Mounting Plate Assembly
15A Gasket, Inspection Door (RH)
15B Gasket, Inspection Door (LH)
15C Gasket, Inspection Door (Center)
16 Gasket, Pouch
16A Gasket, Flue Pipe
17 Gasket, Clean-out Cover (2 Req’d)
18 Retainer, Clean-out Gasket (2 Req’d)
19 Cover, Clean-out (2 Req’d)
20 Frame, Filter
20A Filter Frame End Support
21 Filter, Air (16x25x1 Permanent)
22 Box, Junction
ITEM DESCRIPTION
22A Cover, Junction Box
23 Blower Housing and Wheel
24 Blower Wheel
25 Motor, Blower
26 Motor Mount Band
26A Motor Mount Arms (3 Req’d)
Capacitor, Blower Motor (10MFD)
26B
Capacitor, Blower Motor (20MFD)
26C Capacitor Strap
26D Capacitor Insulator
26E Blower Side Rails (2 Req’d)
26F Wire Harness, Blower Motor
26G Wire Harness, Fan Timer Board
26I Wire Harness, Transformer
26J Wire Harness, Supply
27 Board, Fan Timer
28 Box, Control
28A Transformer (120/24V.- 40VA.)
29 Assembly, Oil Burner
29A Motor, Oil Burner
29B Pump, Oil
29C Head, Flame Retention
29D Combination, Air Tube
29E Relay, Protector
29F Ignitor, Oil Electronic
Nozzle (0.50 gph / 70
o
W )
Nozzle (0.70 gph / 70
o
W )
Nozzle (0.85 gph / 70
o
W )
29G
Nozzle (1.00 gph / 70
o
W )
Elbow, Flue Pipe (5” Dia.)
30
Elbow, Flue Pipe (6” Dia.)
Regulator, Draft (5”)
31
Regulator, Draft (6”)